Table of Contents
Advertisement
Important
Video input connector on the faceplate of Matrox Morphis Dual
for PCI-104
If Matrox Morphis Dual for PCI-104
Matrox 4Sight X unit, the back panel faceplate comes factory installed with one
video input connector. This connector is a 44-pin DB-HD female connector.
The pinout of this connector is outlined in the following table.
Note the following about the power supply:
• The maximum current on a +12 V power supply is 0.75 A.
• Auto-resettable fuse: Yes.
30
Pin
Signal
1
12V
2
VID_IN11
3
GND
4
GND
5
GND
6
NC
7
VID_IN13
8
GND
9
VID_IN14
10
GND
11
VID_IN4
12
P0_TTL_TRIG_IN
13
VID_IN2
14
GND
Pinout descriptions of back panel connectors
1
is factory installed in the PCI/104-Express
15
44
Description
+12 volt power, up to 750 mA total with pin 16.
Analog video input 11 (CVBS 11 or C5).
Ground.
Ground.
Ground.
No connect.
Analog video input 13 (CVBS 13 or C6).
Ground.
Analog video input 14 (CVBS 14 or Y7).
Ground.
Analog video input 4 (CVBS 4 or Y2).
TTL trigger input for acquisition path 0.
Analog video input 2 (CVBS 2 or Y1).
Ground.
181
1
16
31
Advertisement
Table of Contents
