Event Log Configuration Submenu; Mps Configuration Submenu - Matrox 4Sight X Installation And Hardware Reference

126 Appendix A: BIOS reference
Item
Options
View Event Log
Enter
Mark All Events As Read
Enter
Clear Event Log
Enter
Item
Options
MPS Revision
1.1 (don't select)
1.4*

Event Log Configuration submenu

The Event Log Configuration submenu allows you to view and change the event
log.
Meaning
This item allows you to view all the items in the event log. Press the Enter key to view the items.
This item allows you to mark all events as read. By doing so, you will no longer be able to access these past
events. You will only be able to read new events when they appear in the event log.
If you press the Enter key, a dialog box will appear, asking you to confirm that you want to mark all events as
read. Using the Tab key or the Left and Right keys, select either Ok or Cancel, and press the Enter key to
continue. You can also press the Esc key to return to the Event Log Configuration submenu.
This item is equivalent to the Mark All Events as Read item as described above. Press the Enter key to clear
the event log.

MPS Configuration submenu

The MPS Configuration submenu allows you to select the MultiProcessor
Specification (MPS) revision for your motherboard.
Meaning
This item allows you to select the MPS revision for your motherboard. MPS is an Intel specification by which
PC manufacturers design and build Intel architecture systems with two or more processors.
Revision 1.1 was the original specification. MPS version 1.4 adds improved support of multiple PCI bus
configurations. Revision 1.4 also introduces suppor t for a secondary PCI bus without requiring a PCI bridge.
For the Matrox 4Sight X unit, you must leave this setting at 1.4.