For Pci-104 - Matrox 4Sight X Installation And Hardware Reference

184 Appendix B: Technical reference
Important
Video input connector on the faceplate of Matrox
Meteor-II/Multi-Channel for PCI-104
If Matrox Meteor-II /Multi-Channel for PCI-104 is factory installed in the
PCI/104-Express Matrox 4Sight X unit, the back panel faceplate comes factory
installed with one video input connector. This connector is a 44-pin DB-HD
female connector.
The pinout of this connector is outlined in the following table.
❖ Note that you cannot source power with this connector.
30
Pin Signal
1 NC
2 HSYNC_TTL_IO
3-5 GND
6-7 NC
8 AUX(USER)_TTL_OUT2
9 AUX(USER)_TTL_IN2
10 NC
11 VID2_IN1
12 NC
13 VID1_IN3
14 GND
15 VID1_IN1
16 NC
17-18 GND
19 CLK_TTL_IN
20 AUX(TRIG)_TTL_IN
15
44
Description
Not connected
TTL horizontal synchronization.
Ground.
Not connected.
TTL user output 2.
TTL user input 2.
Not connected.
Video input 2 (Red).
Not connected.
Video input 1 (Blue).
Ground.
Video input 1 (Red).
Not connected
Ground.
TTL clock input.
TTL trigger input.
1
16
31