Chassis For The Matrox 4Sight Xb Unit - Matrox 4Sight X Installation And Hardware Reference

4.690"
11.913 cm
8.200"
20.828 cm
Important

Chassis for the Matrox 4Sight XB unit

The Matrox 4Sight XB chassis encloses the Matrox 4Sight X motherboard, a riser
board, one or two full-height half-length PCIe boards, one or two 2.5 inch storage
devices (such as hard disk drives or flash disk drives), two SO-DIMM memory
modules, and a fan. Mounting points on the chassis allow the unit to be secured
to other equipment.
0.823"
2.09 cm
0.324"
0.822 cm
1.27 cm
Note that you should use model #6-32 UNC screws (or screws of similar length
and specifications) for mounting the Matrox 4Sight XB unit to other equipment.
The recommended length of the screws is 1/8" (0.125") or 3.2 mm (0.32 cm).
Front panel
0.248"
1.063"
2.7 cm 0.63 cm
0.823"
2.09 cm
Chassis
mounting
points
0.840"
2.13 cm
0.5"
0.248"
0.63 cm
Back panel
7.250"
18.415 cm
Power supply, fan, and chassis 101
Fan