Table of Contents
Advertisement
Motherboard-only
version
More information on
the BIOS Setup utility
The following precautions are applicable to the motherboard-only version of
Matrox 4Sight X:
• Keep the motherboard in its protective bag until you are ready to install it.
• Handle the motherboard by its edges.
Turning off and restarting the unit
Turning off the integrated-unit version of Matrox 4Sight X
To turn off the integrated-unit version of Matrox 4Sight X, push and hold the
power button. While the power button is being pressed, the unit will shut off.
If the unit does not respond to the power button, you can shut down the unit by
shutting down Windows with the Shut Down command.
Rebooting the unit
When the unit is on, you can reboot the unit by using one of the two following
techniques:
• Press the Control-Alt-Delete keys on your keyboard simultaneously.
• Press the power button to turn the unit off, and then press the power button to
turn the unit on again.
If you need to enter the BIOS Setup utility, you must press the Delete key during
power-up self-test (POST). You only have a few moments to press the Delete key
before the boot-up process continues.
For more information on the BIOS Setup utility, refer to Appendix A: BIOS
reference.
Turning off and restarting the unit
29
Advertisement
Table of Contents
