Table of Contents
Advertisement
15
Connecting external devices to DigiMix
There are various connection possibilities available to you for DigiMix.
Available DigiMix cables
The analog component input/output cable (DMX/CAV/CBL) lets you
connect either an analog component or composite input source and one
recorder. The S-Video input/output cable (DMX/YC/CBL) lets you
connect two S-Video sources and one recorder.
To view the signal that you'll be recording, connect a Program monitor
(NTSC or PAL) to your recorder's output.
External
Source
Recorder
Program
Sync Source
Monitor
Typical DigiMix connections
The following illustrations show some typical video connections. In
these illustrations we've connected separate source and record decks.
You may, however, use the same deck as both your source and record
device by making the input and output connections to a single deck.
Important
If your system includes a DigiLinx card, do not connect an
external sync source to DigiMix. Instead, you must connect an external
sync source to the REF IN connector on DigiLinx or genlock to one of
your digital input sources.
Connecting external devices to DigiMix
Advertisement
Table of Contents
