Installing Or Removing Ram - Matrox 4Sight X Installation And Hardware Reference

76 Chapter 3: Adding devices to the Matrox 4Sight X motherboard

Installing or removing RAM

The Matrox 4Sight X motherboard features two 200-pin SO-DIMM slots in which
you can install random access memory (RAM) modules. Each slot can support one
DDR2 SDRAM module up to 2 Gbytes in size. Matrox 4Sight X supports 1.8 V,
unbuffered, PC2-5300-compliant DDR2 SDRAM. Contact Matrox for a list of
supported modules.
This section describes how to install or remove one DDR2 SDRAM module.
DDR2 SDRAM SO-DIMM module
Clip Clip
Notches
SO-DIMM slot
Two SO-DIMM slots