Remote Head Connectors And Auxiliary I/O Connector On The Faceplate Of Matrox Nexis For Pci-104 - Matrox 4Sight X Installation And Hardware Reference

180 Appendix B: Technical reference
To build your own cable, you can purchase the following parts:
Manufacturer:
Connector:
Backshell:
These parts can be purchased from third parties such as Digi-Key Corporation
(www.digikey.com).
Remote head connectors and auxiliary I/O connector on the
faceplate of Matrox Nexis for PCI-104
If Matrox Nexis for PCI-104 is factory installed in the PCI/104-Express
Matrox 4Sight X unit, the back panel faceplate comes factory installed with three
connectors: two remote head connectors and an auxiliary I/O connector. If two
Matrox Nexis boards have been factory installed in the unit, the faceplate has four
remote head connectors and two auxiliary I/O connectors. For the pinout of each
connector, refer to the Matrox Nexis Installation and Hardware Reference.
13
26
Remote head connector
Mating information for DB-15
NorComp, Inc.
180-044-102-001
970-025-010-011
1
14
Mating information for DB-9
NorComp, Inc.
172-E09-102-031
970-009-010-011
5 1
9 6
Auxiliary I/O connector