Related Manuals for Matrox ATC RG-200DL
Summary of Contents for Matrox ATC RG-200DL
- Page 1 ENGLISH Matrox ATC RG Series ATC RG-200DL • ATC RG-400SL User Guide 10992-301-0105 2009.05.21...
-
Page 2: Hardware Supplied
Thank you for purchasing a Matrox ATC RG product. This product is a complete remote graphics solution. ATC RG-200DL units can support up to two monitors. These monitors can be dual or single link digital monitors or analog monitors. ATC RG-400SL units can support up to four digital or analog monitors. - Page 3 Matrox installation CD-ROM before you restart. If you’re installing an ATC RG-200DL unit with a dual link digital monitor, the display driver used by Windows Service Pack 2 may disable your dual link DVI connector and enable the HD-15 connector.
-
Page 4: Hardware Installation
Hardware installation This section describes how to install a Matrox interface card in your host computer. If your Matrox interface card is already installed in your computer, skip to information specific to your computer, like how to remove its cover, see your system manual. WARNING: To avoid personal injury and to prevent damage to your computer or Matrox hardware, turn off your computer, unplug it, and then wait for it to cool before you install... - Page 5 an expansion slot for your interface card Most computers have different types of expansion slots. Choose a PCI or PCI Express (PCIe) ×1 slot, depending on the type of Matrox card you have. If you have a PCI card, your card supports both 64-bit and 32-bit PCI slots.
- Page 6 Your Matrox card is now installed. Before restarting your computer, first connect your RG400SL unit to your computer, then connect your monitors and your peripherals to your unit setup”, page 7). After connecting, restart your computer and install your Matrox software. WARNING: If your computer doesn’t restart after your Matrox card is installed, turn off your computer to avoid damaging electronic parts.
-
Page 7: Connection Setup
Connection setup This section describes how to connect monitors and other peripherals to your Matrox ATC RG unit. Connection overview Audio cable Monitor connectors (stereo or SPDIF) (4 DVI for RG-400SL, 2 DVI + 2 HD-15 for RG-200DL) Power cable USB cables Optical cables USB cables... - Page 8 Step-by-step connection setup WARNING: Because the body of your ATC RG unit is used to disperse heat, it may become warm to the touch. Make sure your unit is located in a well ventilated area and nothing is blocking its ventilation holes. Connect your unit to your interface card To connect your ATC RG unit to your...
- Page 9 ATC RG-200DL – Connect your monitors to the monitor connectors at the back of your Extio unit. If your monitors have DVI connectors, connect them directly to the DVI monitor connectors ( ) at the back of your unit. If your monitors have HD-15 connectors,...
- Page 10 Connect your audio devices (optional) Your unit has 2 input and 2 output audio connectors. The 2 input connectors are ) and Microphone output audio connectors are ) and Line out connectors support stereo jack connectors. connector also supports SPDIF (Sony/Philips Digital Interface Format) mini- Line out plug optical connectors.
- Page 11 On your ATC RG unit, make sure the reception indicator light is off while your unit is turned on. This indicator light is inside your unit next to the optical connector. If the indicator light is on (red) and you have separate optical cables, switch the cables in the optical connector of your Matrox product.
-
Page 12: Product Information
To get the most of your Matrox product, we recommend using the highest color palette setting (a 32-bit color palette) for all your displays. 12 Matrox RG Series – User Guide Matrox ATC RG-200DL Matrox ATC RG-400SL DVI (single and dual link) - Page 13 The display resolutions and refresh rates available depend on your Matrox graphics hardware, display driver, software monitor settings, and monitor. For information on the capabilities of your monitor, see your monitor documentation. If you’re using multiple monitors, your Matrox hardware uses the same display resolution and monitor settings for all your monitors.
-
Page 14: Customer Support
Customer support Matrox Web Matrox is on the Internet with a World Wide Web (WWW) site. Our Web site has product literature, press releases, technical material, a sales office list, trade show information, and other relevant material. Visit the Matrox Graphics Web site at www.matrox.com/graphics. E-mail questions or comments regarding the site to webmaster@matrox.com. - Page 15 Warranty A. Limited Warranty Statement 1. Matrox Graphics Inc. (“Matrox”) warrants to the end-user customer, who provides adequate proof of purchase that Matrox hardware products purchased from Matrox authorized dealers will be free from defects in materials and workmanship for a period of one (1) year from the date of purchase. This warranty applies only to the original end- user purchaser and is non-transferable.
- Page 16 C. Limitations of Liability 1. EXCEPT FOR THE OBLIGATIONS SPECIFICALLY SET FORTH IN THE LIMITED WARRANTY STATEMENT, IN NO EVENT SHALL MATROX BE LIABLE FOR: a. any direct, indirect, special, incidental, consequential, foreseeable or unforeseeable, or punitive damages, whether based on contract, tort, delict or any other legal theory and whether advised of the possibility of such damages, and/or b.
-
Page 17: Software License Agreement
Software license agreement Single User Products This Matrox software (the “Software”) is copyrighted by Matrox Graphics Inc. All rights are reserved. The purchaser is granted a license to use the software only, subject to the following restrictions and limitations: 1. The license is for the original purchaser only, and is not transferable without written permission of Matrox. 2. - Page 18 Thank you for choosing Matrox Please register online (http://www.matrox.com/graphics/en/registration) to be eligible for customer support, new product announcements, and information on special offers and upcoming events.
- Page 19 FCC Compliance Statement Remark for the Matrox hardware products supported by this guide comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
- Page 20 (Français) Informations aux utilisateurs Européens – Déclaration de conformité Remarque sur les produits matériels Matrox couverts par ce guide Ces unités sont conformes à la directive communautaire 89/336/EEC pour les unités numériques de classe A. Les tests effectués ont prouvé qu’elles sont conformes aux normes EN55022/CISPR22 et EN55024/CISPR24.
- Page 21 Avertissement sur l’épilepsie À lire avant toute utilisation d’un jeu vidéo par vous-même ou votre enfant susceptibles de faire des crises d’épilepsie ou d’avoir des pertes de conscience à la vue de certains types de lumières clignotantes ou d’éléments fréquents dans notre environnement quotidien. Ces personnes s’exposent à des crises lorsqu’elles regardent certaines images télévisées ou qu’elles jouent à...
- Page 22 Rechte vorbehalten. • (Italiano) Tutti i diritti riservati. • (Español) Reservados todos los derechos. Trademarks • Marques déposées • Warenzeichen • Marchi registrati • Marcas registradas Matrox Electronic Systems Ltd. / Matrox Graphics Inc... Matrox Adobe Systems Inc..Acrobat Apple Computer, Inc.
- Page 23 (English) Disclaimer THE INFORMATION IN THIS GUIDE IS SUBJECT TO CHANGE AT ANY TIME AND WITHOUT NOTICE. Matrox Graphics Inc. reserves the right to make changes in specifications at any time and without notice. The information provided by this document is believed to be accurate and reliable. However, no responsibility is assumed by Matrox Graphics Inc.
- Page 24 Matrox Graphics Inc. 1055 Saint Regis Boulevard Dorval, Quebec, Canada H9P 2T4 North America: 1-800-361-1408 International: (514) 822-6000 Email: graphics@matrox.com Web site: www.matrox.com/graphics Technical support: www.matrox.com/graphics/support To locate the sales office nearest you, visit www.matrox.com/graphics/contact...