Overview - Matrox 4Sight X Installation And Hardware Reference

32 Chapter 2: Connecting peripherals to the unit
Front panel and back pane external connectors
Faceplate with connectors of PCI-104 or PCI/104-Express board(s)
installed in PCI/104-Express Matrox 4Sight X unit
Audio
input
Power
button
Audio
output
Important

Overview

This chapter describes how to connect various devices to the Matrox 4Sight X
unit.
Faceplate(s) with connectors of full-height, half-length PCIe board(s) installed in Matrox 4Sight XB unit
Serial
IEEE 1394b
ports
ports
Power
connector
Back panel
In addition to connecting the devices, some devices must be configured to properly
interact with Matrox 4Sight X. For information on the configuration procedure,
refer to the Matrox 4Sight X operating-system specific manual (on the
Matrox 4Sight X CD).
The front and back panels of Matrox 4Sight X provide external connections to:
• Matrox or third-party full-height, half-length PCIe boards (for the
Matrox 4Sight XB unit only)
l
The Matrox 4Sight XB
unit is taller
Auxiliary I/O
Back
panel connector
LEDs
Front panel
GigE Ethernet connectors
(each with two LEDs)
DVI-D
connector
USB connectors
(USB 2.0 and 1.1 compatible)
Analog
video
output
connector