Entering Patient Information - Mallinckrodt INOmax DSIR Plus MRI Operation Manual

Entering Patient Information

The following are instructions of how to use the patient identifier screen.
Note:
• Any identifier entered will be linked with each INOMAX cylinder used during treatment.
1
Figure 3-11
Figure 3-12
3-18
A patient identifier and patient details can
be entered at any time during the treatment
of a patient by pressing the patient
information button in the right-lower corner
of the main screen.
If patient identifier has not been entered
Note:
a "Patient Info Incomplete" indicator
will stay illuminated in the text message
area of the screen, unless an alarm
condition is present (see Figure 3-11).
After pressing the patient information button, the
patient information screen will appear (see Figure
3-12).
Press the "Enter Patient Identifier" button to
access keyboard.
The patient identifier screen (see Figure 3-13)
allows a unique alphanumeric patient identifier to
be entered that contains six to eight characters
(note: spaces will be accepted).
For HIPAA compliance, do not use
Note:
identifiers traceable to a specific patient.
Consult and comply with internal hospital
HIPAA guidelines when entering a
patient identifier.
1
Part No. 20568 Rev-02
2015-08