Table of Contents
Advertisement
Part No. 20568 Rev-02
2015-08
3. CONFIRM
the selection by pressing the
control wheel or the button
associated with the desired
function again.
A two minute monitoring
Caution:
alarm delay will prevent
the low NO monitoring
alarm from occurring
while the measured
values stabilize.
• After confirming a desired
Note:
dose, the NO dose setting
indicator will fill to the
set dose, and the alarm
setting (high and low) will
automatically be set for the
first setting only.
• Any other changes will
require the high and
low alarm settings to be
adjusted.
1-17
Advertisement
Table of Contents
