Table of Contents
Advertisement
Display and user controls
The INOmax DS
Plus MRI has a color touch screen display and a control wheel for adjusting and entering
IR
user settings. The buttons on the touch screen and the control wheel perform a variety of functions using a
three-step procedure (see "Setting and making changes on the INOmax DS
The touch screen buttons and control wheel are used to:
• Set the concentration of delivered NO
• Adjust alarm limits
• Silence alarms
• Calibrate the sensors
• Review alarm history
• Define setup options
• Enter patient information
• If a button has been selected and no activity has been sensed within 20 seconds, the display will
Note:
return to its previous condition. If a button is greyed out, it is not active.
• Position delivery system so user screen is unobstructed and the speaker is not covered.
1-14
Plus MRI", page 1-16).
IR
When a value is being changed, pressing the
"Cancel Active Status" button during editing will
stop the change and return the parameter to its
original value (similar to the escape key on a
computer).
Part No. 20568 Rev-02
2015-08
Advertisement
Table of Contents
