Electromagnetic Compatibility Information - Mallinckrodt INOmax DSIR Plus MRI Operation Manual

Electromagnetic Compatibility Information

Guidance and Manufacturer's Declaration – Electromagnetic Emissions
The INOmax DS Plus MRI system (with GaussAlert™ alarms) is intended for use in the electromagnetic
IR
environment specified below. The user of the INOmax DS
in such an environment.
Emissions Test
RF radiated emissions per
CISPR 11 Ed. 5.1b:2010
RF conducted emissions per
CISPR 11 Ed. 5.1b:2010
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/flicker
emissions
IEC 61000-3-3
Part No. 20568 Rev-02
2015-08
Plus MRI system should assure that it is used
IR
Compliance
Group 1
Class B
Class B
Class B
Complies
Electromagnetic Environment -
Guidance
The INOmax DS Plus MRI
IR
system uses RF energy only for
its internal function. Therefore,
its RF emissions are very low
and are not likely to cause any
interference in nearby electronic
equipment.
The INOmax DS Plus MRI
IR
system is suitable for use in
all establishments, including
domestic establishments and
those directly connected to the
public low voltage power supply
network that supplies buildings
used for domestic purposes.
The INOmax DS Plus MRI
IR
system is suitable for use in
all establishments, including
domestic establishments and
those directly connected to the
public low voltage power supply
network that supplies buildings
used for domestic purposes.
7-5