Mallinckrodt INOmax DSIR Plus MRI Operation Manual page 123

Cleaning the GaussAlert™
Use a soft cloth dampened with water to clean the enclosure. Use an aqueous solution of up to 75% isopropyl
alcohol for more efficient cleaning. Disinfection may be accomplished with the use of denatured alcohol.
Cleaning the INOmeter
• Apply cleaning agent to a cloth before application; do not spray directly on the INOmeter.
Caution:
It is important to prevent pooling and direct contact with electrical connections, which can
cause damage over time.
• Be sure that the INOmeter is completely dry before using.
• Do not saturate the INOmeter with excessive solution. Liquid may flow into the device
and damage internal components.
• Do not use organic, petroleum-based solvents, glass cleaners, acetone or other harsh
cleaning agents.
• Do not use abrasive cleaning agents (such as steel wool, silver polish or cleaner).
External surfaces and the Display
• Clean the outer surface of the INOmeter with a soft cloth dampened in a mild soap and water solution,
isopropyl alcohol (70%) or with one of the cleaning agents (see cleaning agent list above) while following
the manufacturer's recommendations.
Part No. 20568 Rev-02
2015-08
6-5