Mallinckrodt INOmax DSIR Plus MRI Operation Manual page 108

5-6
If the calibration was unsuccessful, the O
bar will turn red.
• Attempt another calibration.
To repeat the O
Note:
the START CAL button at the bottom of
the screen.
If the O sensor has failed, the display indicates
2
the failed sensor symbol in the monitoring area of
that sensor.
Repeat calibration, (press the Alarm
Help button for on-screen alarm
help or see Section 4/ Alarms and
Troubleshooting.)
progress
2
high calibration, press
2
Part No. 20568 Rev-02
2015-08