Quick Install Steps (Tcp/Ip Protocol) - Xerox DocuPrint C55 Supplementary Manual

Quick Install Steps (TCP/IP Protocol)

1. Install the Network Interface Card in the printer (if not already
installed). Details are in this document in the section entitled
Installation of the Network Interface Card.
2. Connect appropriate cabling from printer to network. Details are
in this document in the section entitled Network Cable
Connection.
3. Refer to the section in this document entitled Set An IP Address
and perform one of the provided procedures to set an IP address
for your printer.
4. Print the Print Settings page. Details are in this document in the
section entitled Print The Print Settings Page.
5. Check the Print Settings page and verify that both proper protocol
and desired connector are enabled.
6. Note the DocuPrint TCP/IP address.
7. Verify that "Microsoft TCP/IP Printing" is loaded.
8. From your desktop, open the Main Group
9. Double-click the Control Panel icon.
10. Double-click Network icon. Use the mouse and scroll through
the Installed Network Software list. Verify that the "Microsoft
TCP/IP Printing" is listed in the Installed Network Software
window.
W I N D O W S 15