Quick Step Overview
1. Verify physical cable connections from your printer to the
network.
2. Configure your TCP/IP environment and the DocuPrint printer so
that they can communicate with each other. Perform the
following procedures contained in the chapter entitled Connecting
to your network.
Set An IP Address (Static or Dynamic)
Setting a SUBNET MASK at the Control Panel (optional)
Setting up AppSocket (optional)
Setting the DEFAULT GATEWAY (optional)
Printing the Print Settings page
3. Install the DocuPrint printer driver on the server or station by
ONE of the following methods:
Floppy Disk Install
Network Install
U N I X 4