Xerox DocuPrint C55 Supplementary Manual page 84

5. Choose the desired language and click NEXT>.
6. After a few moments, the Install Shield Wizard will load. A new
dialog screen with installation options will appear. Select from
one of these options:
Typical Installation
Choosing this mode will automatically copy all necessary
software to your hard disk in a predetermined directory.
Custom Installation
Choosing this mode will give you control over which files are
copied to your hard drive and where they are placed.
Disk Image Copy
Choosing this mode gives you the ability to copy the entire
disk set to a local or network drive. This mode is
recommended to install the DocuPrint drivers and
CentreWare DP software to multiple stations on a network.
7. Once you have selected your installation mode, click Next>.
8. From the Select Printer screen, choose the type of printer you are
installing, then click Next>.
9. Follow the prompts (these will vary depending on the Install
Mode selected). Be sure to provide the correct disks when
requested.
10. When prompted, remove all disks. For network printing,
CentreWare DP will perform all fileserver and queue setup.
Details on Centreware DP are available in the chapter entitled
CentreWare DP Software Instructions.
W I N D O W S 6