Xerox DocuPrint C55 Supplementary Manual page 109

14. Click the Browse button and select the directory containing the
Windows NT drivers, then click Open.
15. Select the appropriate .INF file, then click OK.
16. When the Wizard returns you to the previous dialog, verify that
the path and file name are correct and click OK.
17. At the next dialog, enter a name for the printer and select whether
you want that printer to be the default, then click Next>.
18. If the printer will not be shared, click Next>. To share the
printer, enter a Share Name , check the share check box, then
click Next>.
19. At the next dialog it is recommended that you print a test page.
Click Finish.
20. Wait for the Test Print to print. A new dialog will ask for
confirmation of the test print, click Yes.
21. Send a print job to the printer.
22. Check the print job for print quality. If print quality problems
exist, use the print quality section of the DocuPrint C55/C55mp
User Guide to correct the problem.
23. If your print job did not print, see the Troubleshooting section for
your operating system in this chapter of the DocuPrint
C55/C55mp Technical Information Guide to correct the
problem.
W I N D O W S 31