Chapter Introduction; Purpose Of This Chapter; Objective; Requirements - Xerox DocuPrint C55 Supplementary Manual

Chapter Introduction

Purpose of this Chapter

Objective

Requirements

The purpose of this chapter is to provide detailed information on Print
Server Installation, Initial Testing and Troubleshooting (if required)
for the setup of your DocuPrint printer operating under the various
Novell NetWare versions.
This task would ordinarily be performed by an experienced Systems
Administrator.
The objective of this chapter is to provide the required information to
enable you to connect and set up your DocuPrint printer on your
network as quickly as possible.
In general, the requirements needed for printer connection and setup
include:
A workstation with the Windows operating system software
installed for that station and a working knowledge of the
operating system.
CentreWare DP and appropriate print driver software loaded on
your workstation.
You must be logged into a NetWare 3.1X or 4.1X network
running the IPX protocol with SUPERVISOR or ADMIN
privileges.
A network card installed in the DocuPrint printer, together with
appropriate cabling to link the card to your network. A Print
Settings page from your DocuPrint printer. Refer to the chapter
entitled Printer Connection and Setup for details on network
card and cabling information, as well as how to print a Print
Settings page.
N O V E L L N E T W A R E S E T U P 3