Xerox DocuPrint C55 Supplementary Manual page 120

16. From the Create Printer dialog box you must now select a
printer device:
17. Select Print to: and pull down this window and select Other...
This will open up the Print Destinations window. Select "LPR
Port" from the Print Destinations window and select OK.
18. This will open up the Add LPR compatible printer window.
Type in the IP address of the DocuPrint printer and "ps" for the
printer name and select OK. Note that the printer name is case
sensitive.
19. To Share the printer click in the check box next to Share this
printer on the network. For unshared printers skip to the next
step.
20. Select OK to close Create Printer window. You can now print to
the printer. If you shared it, your NT clients can now also print.
21. Send a print job to the printer.
22. Check the print job for print quality. If print quality problems
exist, use the print quality section of the DocuPrint C55/C55mp
User Guide to correct the problem.
23. If your print job did not print, see the Troubleshooting section for
your operating system in the DocuPrint C55/C55mp Technical
Information Guide to correct the problem.
NOTE: Printers connected to a Windows NT network with TCP/IP
protocol enabled can use a Web Browser to monitor and configure
your printer. Refer to the section in this document entitled Internet
Printer Services.
W I N D O W S 42