Quick Install Steps (Dlc/Llc Protocol) - Xerox DocuPrint N4525 Network Installation Manual

In the Add Xerox TCP/IP Port window:
a. Under Enter a Port Name, enter a unique name for the port
being added.
Under Enter a printer name or IP address, enter the printer's
b.
host name or IP Address.
c. Click Next.
Note
To locate Xerox printers on your local area network, select
Auto Printer Discovery, and then click Refresh. The Xerox
TCP/IP Port Monitor searches the network for Xerox printers
and displays them in a list. Select your desired printer from
the list and click OK.
13. After all the port settings have been configured and verified, a
Completing dialog box appears summarizing all of the settings.
You have the opportunity to change any of the settings by clicking
the Back key. Otherwise, click the Finish key to complete the port
setup.
14. Click OK to exit from Printer Properties. This completes the
installation of the Xerox TCP/IP Port.

Quick install steps (DLC/LLC protocol)

1. At the Desktop, right-mouse-click the Network Neighborhood
icon and select Properties.
2. Click on the Protocols tab and verify that the DLC/LLC protocol
has been loaded.
3.
If this software is not present, install it using the documentation
provided by Microsoft, and then return to this document.
4. Open the Control Panel and double-click the Printers icon.
5. Double-click Add Printer; the Add Printer Wizard starts.
6. Verify that My Computer is selected and click Next>.
7. Click Add Port.
8. Select the Hewlett-Packard Network Port in the Available Print
Monitors box and click OK.
9.
Enter a unique name for the port to be used in the area provided.
10
DocuPrint N4525 Network Laser Printer