Telnet Menu System (exploded)
This section of the document explains the Telnet menu system. Once
you have connected to the printer and started the console session, type
"h" to see this help menu:
Ready for command...
Command [D,E,I,L,N,R,Z] -->h
-- Available options ---
C
Configure console for status monitoring
D
Display network interface settings
E
Set Ethernet options
I
Set IP number
L
Limit Access by IP number
N
Set Network Protocol options
R
Reset Printer
Z
Reset network card settings to factory defaults
Command [D,E,I,L,N,C,R,Z]
The items contained in this menu are detailed in this section. After
each menu item letter are the parameters or submenus which it
supports.
-->
U N I X 28