Introduction - Xerox DocuPrint C55 Supplementary Manual

Introduction

Purpose of this Chapter
Objective
Requirements
The purpose of this chapter is to outline the connection and
configuration of your DocuPrint printer for use on your network.
This task would ordinarily be performed by an experienced Systems
Administrator.
The objective of this chapter is to provide the required information to
enable you to connect and set up your DocuPrint printer on your
network using your specific UNIX workstation operating system.
A workstation with the appropriate operating system software
installed for that station.
Advanced knowledge of one of the UNIX operating systems listed
below:
1. Solaris 1.1X (SunOS)
2. Solaris 2.X (Solaris)
3. HPUX
4. AIX
5. Silicon Graphics (SGI UNIX)
6. Other UNIX versions
A network card installed in the DocuPrint printer, together with
appropriate cabling to link the card to your network. Refer to the
chapter entitled Connecting To Your Network for network card
installation and cabling information.
U N I X 3