PROCEDURE H
UPGRADE VIA TFTP
Warning: Once the upgrade process has begun, do not power off your
printer !
1. Print a Printer Settings page. Print a Printer Diagnostics page. Keep
these pages for future reference. For directions on doing this reference
the section labeled Check the following before the Upgrade.
2. tftp to <printername> OR <printerIPaddress>
3. Change mode to binary
4. Put <filename>
Where:
< printername> = as referenced in the system's hosts file
< printerIPaddress> = the TCP/IP address the printer has been assigned
<filename> = the path and name of the upgrade file
5. The file will be sent to the printer. To see if your upgrade was
successful see the section labeled Determining a Successful Upgrade.
If successful follow the instructions in After the Upgrade. For
problems consult the section labeled General Troubleshooting.
S Y S T E M
M A I N T E N A N C E
28