Novell Netware Software Step-By-Step - Xerox DocuPrint C55 Supplementary Manual

Novell NetWare Software Step-by-Step

1. Verify that CentreWare DP and a DocuPrint printer driver have
been loaded on the workstation.
In Windows 3.1X or Windows for Workgroups, check Print
Manager to see the DocuPrint printer listed as an available
printer.
In Windows 95, double click on My Computer (you may have
changed this name). Open the Printers folder to verify that there
is an entry for the type of DocuPrint printer you installed.
2. Launch the CentreWare DP software.
In Windows 3.1X or Windows for Workgroups, locate the
CentreWare DP group and double click the CentreWare DP
icon.
In Windows 95, click on the Start button and slide the highlight
up to the Programs entry. In the next fold-out window, slide the
highlight up or down until you reach the CentreWare DP entry.
Release the mouse button to launch.
3. For either Windows 3.1X or Windows 95 platform, check the
Printers window at the left side of the CentreWare DP screen
for the printer's name. If no names appear, your station is unable
to find a printer on the network. Perform the steps in the section
entitled Hardware Step-by-Step to verify your printer's settings,
then return to this procedure.
4. If the desired printer's name appears, your printer is
communicating through the network. Select the desired printer. If
a communications error message appears, your printer is not able
to communicate with your workstation. Perform the steps in the
section entitled Hardware Step-by-Step to verify your printer's
settings, then return to this procedure.
N O V E L L N E T W A R E S E T U P 23