Chapter Introduction; Purpose Of This Chapter; Objective; Requirements - Xerox DocuPrint C55 Supplementary Manual

Chapter Introduction

Purpose of this Chapter

Objective

Requirements

The purpose of this chapter is to provide detailed information on
Software Installation, Initial Testing, and Troubleshooting (if
required) for the setup of your DocuPrint printer operating under the
various Windows versions.
This task would ordinarily be performed by an experienced Systems
Administrator.
The objective of this chapter is to provide the required information to
enable you to connect and set up your DocuPrint printer on your
network as quickly as possible.
Basic requirements for network printer connection and setup are listed
for various workstation operating systems within the sections
contained in this Technical Information Guide chapter.
In general, the requirements needed for printer connection and setup
include:
A workstation with the appropriate operating system software
installed for that station.
A working knowledge of the operating system being used on your
workstation.
A network card installed in the DocuPrint printer, together with
appropriate cabling to link the card to your network. Refer to the
chapter entitled Printer Connection and Setup for details on
network card and cabling information.
W I N D O W S 4