15. At the CentreWare DP main screen, select the Printer drop-
down menu. Highlight the Properties entry.
16. Once Properties is selected, highlight Connections.
17. Select the Network Card TAB. A new dialog box screen is
brought to the front and displays information about frame type
and connectors.
18. Be certain the card is enabled and the connector and frame type
are correct.
19. If any changes are made, reset the printer from the Control Panel
and allow two minutes for the printer to reattach to the desired
fileserver.
20. Run a test print again. If the test print does not print, contact
Customer Service.
N O V E L L
N E T W A R E
S E T U P
25