Cleaning Procedures
Cleaning the outside of the Printer
Perform the "Clean the outside of the printer" procedure:
If it becomes soiled from use.
If it has toner particles on the case.
Dry Ink (Toner) spills should be wiped up only with a dry cloth. Do not
use a wet or damp cloth.
1. Turn the printer's power switch OFF but leave the power cord plugged
into the wall receptacle to maintain a static ground.
2. Take a clean, damp, lint-free cloth and wipe the case to remove toner
smudges and dirt.
3. Gently wipe the Control Panel buttons.
4. Carefully clean the Display Panel with minimal pressure applied to the
panel.
5. Turn the printer's power switch ON.
S Y S T E M
M A I N T E N A N C E
6