Xerox DocuPrint C55 Supplementary Manual page 334

INSTRUCTIONS FOR REMOVING LOWER FEEDER
ASSEMBLY (OPTIONAL EQUIPMENT)
When the lower feeder is installed onto the DocuPrint C55, it is
automatically locked in place to prevent it from falling off when moved.
To remove the lower feeder assembly from the printer, the assembly needs
to be unlocked from the printer frame.
To remove the lower feeder from the DocuPrint C55, you will need the
following:
Flat-head screwdriver
3 people
PROCEDURE
1. Position the printer so that the right-hand side is accessible.
2. Locate the screw hole in center of the lower feeder assembly on the
right-hand side of the printer.
3. Have one person stand in front of the printer and one person stand in
back of the printer.
4. Have the third person insert the screwdriver into the screw hole and
engage the slot on the screw.
5. Turn the screwdriver a quarter turn in the clockwise direction until you
hear a soft click. This click will unlock the lower feeder assembly from
the printer assembly. DO NOT release screwdriver.
6. While one person holds the screwdriver in the turned position so the
lower feeder assembly is unlocked, the other two people should use the
hold positions provided and lift the printer off the lower feeder
assembly.
S Y S T E M M A I N T E N A N C E 11