Windows 95 Troubleshooting; Procedure - Xerox DocuPrint C55 Supplementary Manual

Windows 95 Troubleshooting

Procedure

This troubleshooting section assumes:
Your printer was purchased with a network interface card (NIC)
installed OR you have installed, connected, and verified the
operation of the network interface card using the procedures
found in the Connecting to your Network chapter of this
document.
You have loaded a DocuPrint C55/C55mp PCL or PostScript
print driver.
You have printed and retained a current copy of the Print Settings
page.
1. Verify these items in the Network Settings area of the Print
Settings page:
Connector Type is set for Auto OR the specific type that you
have used to connect the printer to your network.
2. Verify these items in the NetBEUI area of the Print Settings
page:
Enabled: is set to Yes.
Name: contains the desired name for the printer.
3. Verify the following items in the Software and Memory area of
the Print Settings page:
Interpreters: PCL or PostScript (depending on your driver).
4. From a workstation desktop use the right mouse button and select
Network Neighborhood then with the left mouse button select
Properties from the cascade menu.
W I N D O W S 38