Introduction; Purpose Of This Chapter; Objective; Requirements - Xerox DocuPrint C55 Supplementary Manual

Introduction

Purpose of this Chapter

Objective

Requirements

The purpose of this chapter is to provide detailed information on
Software Installation, Configuration, Initial Testing, and
Troubleshooting of the DocuPrint printer for use on your network.
An experienced Systems Administrator would ordinarily perform this
task.
The objective of this chapter is to provide the required information to
enable you to connect and set up your DocuPrint printer on your
network using your specific workstation operating system.
In general, the requirements needed for printer connection and setup
include:
A workstation with the appropriate operating system software
installed for that station.
A working knowledge of the operating system being used on your
workstation.
A network card, or Serial port/LocalTalk Interface Option card
installed in the DocuPrint printer, together with appropriate
cabling to link the card to your network. Refer to the chapter
entitled Printer Connection and Setup for details on network
card and cabling information.
M A C I N T O S H 3