Dynamic Addressing Setup - Xerox DocuPrint C55 Supplementary Manual

Dynamic Addressing Setup

The printer is assigned a TCP/IP address by a network RARP/BOOTP, or
DHCP server. This address is automatically assigned to the printer.
Perform the steps below:
1. Press the On Line button on the Control Panel. Be sure the light next
2. Press the Menu button. The ON-LINE message disappears and TOP
3. Press Next until <COMMUNICATIONS> appears on the Display
4. Press Next until <NETWORK SETUP> is displayed and then press
5. Press Next until <TCP/IP> is displayed and then press ENTER.
6. Press Next while <IP ADDRESS> is displayed and then
7. With <IP Address Res> displayed, press ENTER.
8. Press Next until <Dynamic> is displayed and then press ENTER.
9. Exit the menu system.
10. Reset the Printer to have the new settings take effect.
C O N N E C T I N G
to it is OFF.
MENU is displayed.
Panel and then press ENTER.
ENTER.
press ENTER.
T O Y O U R N E T W O R K 11