PREPARE THE PRINTER
Warning: After turning off the printer, allow the Fuser to cool to a safe
temperature before handling.
1. Ensure that no jobs are in process.
2. Press the printer power switch to OFF.
3. Disconnect the power cord.
4. Disconnect the network interface cable or port cable.
5. Open the front shell and remove and empty the Toner Collector. Retain
this part for reinstallation.
6. Open the top cover and remove the Fuser assembly. Pack this in a
separate box and do not allow it to tip over as may result in an oil spill.
7. Close the top cover.
8. Close the front shell.
S Y S T E M
M A I N T E N A N C E
10