Startup Procedure; Tcp/Ip Discovery - Xerox DocuPrint C55 Supplementary Manual

TCP/IP Discovery

OVERVIEW
In addition to being a quick way to setup and monitor your printer on a
NetWare network, CentreWare DP has the ability to monitor printers on a
network utilizing the TCP/IP protocol.
This feature is especially important on mixed networks or Intranets where
TCP/IP may be used in conjunction with other protocols.

STARTUP PROCEDURE

1. Start CentreWare DP on a workstation.
2. Select the TCP/IP radio button located below the Printers List.
3. CentreWare DP will scan the local subnet of your network for printers
with a TCP/IP address.
4. When the scan has completed, any CentreWare DP supported printer on
your subnet will be displayed in the Printers List.
5. To test, select a printer and CentreWare DP will communicate with that
printer and update the status window graphic to indicate the printer
being monitored.
6. Select the Diagnostics menu. From this menu select the Printer
Maintenance entry.
7. A new dialog screen will open containing consumable (Toner,
Developer) information for the selected printer.
8. Any supported printer on your subnet can be accessed using this
procedure. To expand printer discovery to other subnets or to limit it to
specific printers, see the section entitled Configuration Procedure.
C E N T R E W A R E D P S O F T W A R E I N S T R U C T I O N S 33