Xerox DocuPrint C55 Supplementary Manual page 129

3. Verify the following items in the Software and Memory area of
the Print Settings page:
Interpreters: PCL or PostScript (depending on your driver).
4. From the server desktop use the right mouse button and select
Network Neighborhood then with the left mouse button select
Properties from the cascade menu.
5. The Network dialog will appear. Select the Protocols TAB.
6. Check the list of installed network protocols for the following
item:
TCP/IP Protocol
7. If you have elected to run CentreWare DP you must also have
loaded Novell NetWare Client 32, a Novell server on the
internet, and an NWLink IPX/SPX Compatible transport
protocol component. You may also discover printers that have
been assigned a TCP/IP address.
8. As required, click Add and install any components not listed and
restart the system..
9. Once rebooted, select the Start button and Settings, then select
the Printers folder. The printers window will appear.
10. Verify that you have loaded and selected the correct driver for
your printer.
11. Right mouse click on the Printer icon and select Properties.
12. Select the Ports TAB.
13. Verify that the IP Address in the Print to the following port list
is the same as the one from the Print settings page. If necessary
reselect the TCP/IP number used for your printer.
14. Start an application and send a print job to the printer. If printer
still does not print contact your Cutomer support representative.
W I N D O W S 51