3. Click your mouse once on the Setup Wizard button or open the
Printer menu and select Setup Wizard.
4. When the Setup Wizard Welcome screen appears, click Next >.
5. When the Select NetWare Server dialog box screen appears,
click once on the Install this device on an NDS Tree.
6. Select the desired NDS Tree.
7. If prompted, enter a user name and password for the desired Tree
and click Login. Once your desired tree is chosen, click Next>.
8. The Select Context dialog screen will appear and the default
context for the selected Tree will be displayed. To configure your
printer for this context, click Next >. To select a different context
click Change Context, select a new context from the list, click
OK, then click Next >.
9. The Name the Device dialog screen will appear. You may enter
a new name for the printer you have selected, or keep the default
name. Click Next >.
10. When the Select Queue dialog screen appears, you may select an
existing queue, or create a new queue. To create a new queue,
click the Create Queue button and enter a new queue name, then
click Create Queue again. Once you have either selected a queue
or created a new one, click Next >.
11. The Confirm Choices dialog screen will appear and display the
new Printer Name, new Name of Queue, Context, and Tree
information you have supplied. Click Finish>. The Wizard
progress box will appear.
12. After a few moments, the Congratulations dialog screen will
appear and a Startup page will print. Review this page to
VERIFY that your Tree, Context, and Print Server name agree
with those you chose in Setup Wizard.
13. Run a test print from a software application to verify the
operation of your printer.
N O V E L L
N E T W A R E
S E T U P
12