U N I X 24
To Use Telnet
At any Telnet client (UNIX, WFW3.11, NT, DOS, ...) Telnet to port
2002 of the printer.
NOTE: Telnet will work only if the TCP/IP protocol stack is loaded
AND it supports Telnet.
NOTE: In the following examples, the expression
XXX.XXX.XXX.XXX refers to the IP address of your printer. You
may also substitute the hostname if it is known.
Starting TELNET
UNIX
At the Command prompt, TYPE: telnet XXX.XXX.XXX.XXX 2002
[ENTER]
WINDOWS NT
At the Command prompt, TYPE: telnet XXX.XXX.XXX.XXX 2002
[ENTER]
WFW3.11 (WITH MICROSOFT'S WIN32S TCP/IP
STACK)
At the Command prompt, TYPE: telnet XXX.XXX.XXX.XXX 2002
[ENTER]