Software Install For Windows 95 - Xerox DocuPrint C55 Supplementary Manual

Software Install for Windows 95

Software installation is accomplished using the DocuPrint installer
which will automatically detect which version of Windows is being
run and load the appropriate print drivers and CentreWare DP for that
version. CentreWare DP is the Administration tool that allows
configuration and monitoring of your DocuPrint printer.
For details on the operation of CentreWare DP, review the chapter in
this manual entitled CentreWare DP Software Instructions.
1. Insert the CD-ROM into your CD-ROM drive.
2. Click once on the Start button.
3. Select the RUN command. A dialog box will prompt you for the
Command Line.
4. TYPE <drive>\xrxsetup (substitute your drive letter for
<drive>).
5. Choose the desired language and click NEXT>.
6. After a few moments, the Install Shield Wizard will load. A new
dialog screen with installation options will appear. Select from
one of these options:
Typical Installation
Choosing this mode will automatically copy all necessary
software to your hard disk in a predetermined directory.
Custom Installation
Choosing this mode will give you control over which files are
copied to your hard drive and where they are placed.
Disk Image Copy
Choosing this mode gives you the ability to copy the entire
disk set to a local or network drive. This mode is
recommended to install the DocuPrint drivers and
CentreWare DP software to multiple stations on a network.
W I N D O W S 7