Xerox DocuPrint C55 Supplementary Manual page 345

PROCEDURE C
COPY VIA THE PARALLEL PORT
Warning: Once the upgrade process has begun, do not power off your
printer !
1. Print a Printer Settings page. Print a Printer Diagnostics page. Keep
these pages for future reference. For directions on doing this reference
the section labeled Check the following before the Upgrade.
2. If you have a C55 mp printer, or a printer with the PostScript option the
parallel port on the printer must be in Auto Select mode. Check the
settings page previously printed. In the Parallel Settings section the
Mode should be set to Auto Select. If it is not you will need to set this
through the printer's Control Panel or CentreWare DP. To make the
setting through the Control Panel do the following:
a) Take the printer off-line by pressing the Online button.
b) Press Menu.
c) Press Next until <COMMUNICATIONS> is displayed. Press
Enter.
d) Press Next until <PARALLEL> is displayed. Press Enter.
e) Press Next until <MODE> is displayed. Press Enter.
f) Press Next until <AUTOSELECT> is displayed. Press Enter.
g) Return the printer to online by pressing the Online button.
3. Send the upgrade file to the printer. An OS/2 user should open a
command prompt, a Windows(95/NT/3.1x) user should run from DOS
or run a DOS session. It is recommended to exit Windows and run
from DOS whenever possible. This will result in a shorter time for the
upgrade process to take place.
4. The format for the copy command is as follows:
copy <filename> <port>[RETURN]
S Y S T E M M A I N T E N A N C E 22