Software Install For Windows Nt 4.0 - Xerox DocuPrint C55 Supplementary Manual

Software Install for Windows NT 4.0

CentreWare DP software installation is accomplished using the
DocuPrint installer. For details on the operation of CentreWare DP,
review the chapter in this manual entitled CentreWare DP Software
Instructions.
Windows NT 4.0 print drivers must be installed using the Add Printer
function.
1. Insert DocuPrint C55 CD-ROM in your in your CD-ROM drive.
2. Click once on the Start button and select Settings, then on the
fold out menu select Printers.
3. Double-click the Add Printer icon. The Add Printer Wizard
will start. Select My Computer and click Next>.
4. Select the port for the printer (LPT1:,LPT2:, etc).
5. The listing screen for manufacturers will appear. Click Have
Disk. At the next screen choose the Browse button to locate the
print driver file.
6. The files for drivers may be found in the \instal\Winnt40
directory. Both PCL and PostScript drivers may be selected from
that directory.
7. After selecting the appropriate driver click OK. In the next
screen, verify the driver name you have chosen and clickNext>.
8. The next screen will allow you to change the name of your printer
and decide whether it will be the default printer. Make your
selections and click Next>.
9. A new screen appears which enables the sharing of the printer. If
you share your printer be sure you select the operating systems
which will be using the printer and click Next>.
10. It is recommended that from the next page you select Yes to print
a test page, then click Finish.
W I N D O W S 9