Os/2 Troubleshooting Step-By-Step; Os/2 Warp V4.0. Os/2 Warp V3.0 (All Versions) Warp Server, Lan Server 4.0, & Warp Connect Using Tcp/Ip For Os/2 Versions 2.0, 3.0, 3.1, 4.0 - Xerox DocuPrint C55 Supplementary Manual

OS/2 Troubleshooting Step-by-Step

OS/2 Warp V4.0. OS/2 Warp V3.0 (all versions)
Warp Server, Lan Server 4.0, & Warp Connect
using TCP/IP for OS/2 Versions 2.0, 3.0, 3.1, 4.0
1. At the OS/2 Command Prompt, issue the command:
ping xxx.xxx.xxx.xxx,
where, xxx.xxx.xxx.xxx is your server IP address (i.e.
109.108.145.22). If you receive a correct ping reply, go to step 2;
otherwise check your TCP/IP configuration and your
LAPS/MPTS/APS configurations. (See IBM Documentation for
configuring TCP/IP for OS/2 and TCP/IP LAPS/MPTS/APS
configuration.)
2. At the OS/2 Command Prompt, issue the command:
ping xxx.xxx.xxx.xxx
where, xxx.xxx.xxx.xxx is your DocuPrint Printer IP address
(e.g.109.108.145.22). If you receive a correct ping reply, go to
step 3; otherwise, check to see that the DocuPrint Printer IP
address has been correctly entered on the printer. Print a
DocuPrint Print Settings page and confirm that the IP address is
entered correctly. If necessary, reenter your IP addresses (IP
address, Gateway Address, Subnet Address).
3. At the OS/2 Command Prompt, issue the command:
ping xxx.xxx.xxx.xxx
where, xxx.xxx.xxx.xxx is your gateway/router IP address (i.e.
100.101.22.5). If you receive a correct ping reply, go to step 4;
otherwise, check to see that TCP/IP for OS/2 configuration is
correct. (See IBM Documentation for configuring TCP/IP for
OS/2 and TCP/IP LAPS/MPTS/APS configuration.)
O S / 2 11