PROCEDURE G
COPY UPGRADE PROCEDURE VIA DLC
Warning: Once the upgrade process has begun, do not power off your
printer !
1. Print a Printer Settings page. Print a Printer Diagnostics page. Keep
these pages for future reference. For directions on doing this reference
the section labeled Check the following before the Upgrade.
2. Send the upgrade file using the copy command.
3. The format for the copy command is as follows:
4. Copy <filename> \\<machinename>\<resourcename> [RETURN]
Where:
<machinename> = server UNC name
<resourcename> = shared printer resource on the server
<filename> = the path and name of the upgrade file
5. To see if your upgrade was successful see the section labeled
Determining a Successful Upgrade. If successful follow the
instructions in After the Upgrade. For problems consult the section
labeled General Troubleshooting.
S Y S T E M
M A I N T E N A N C E
27