Windows Nt 4.0 Troubleshooting (Dlc/Llc); Procedure - Xerox DocuPrint C55 Supplementary Manual

Windows NT 4.0 Troubleshooting (DLC/LLC)

Procedure

This troubleshooting section assumes:
Your printer was purchased with a network interface card (NIC)
installed OR you have installed, connected, and verified the
operation of the network interface card using the procedures
found in the Connecting to your Network chapter of this
document.
You have loaded a DocuPrint C55/C55mp PCL or PostScript
print driver.
You have printed and retained a current copy of the Print Settings
page.
1. Verify these items in the Network Settings area of the Print
Settings page:
Connector Type: is set for Auto OR the specific type that you
have used to connect the printer to your network.
Card Address: (Note this address for later use).
2. Verify the following items in the Software and Memory area of
the Print Settings page:
Interpreters: PCL or PostScript (depending on your driver).
3. From a workstation desktop use the right mouse button and select
Network Neighborhood then with the left mouse button select
Properties from the cascade menu.
W I N D O W S 52