Step-By-Step Setup (Peer-To-Peer, Netbeui) - Xerox DocuPrint C55 Supplementary Manual

Step-by-Step Setup (Peer-to-Peer, NetBEUI)

1. Load your DocuPrint C55/C55mp CD-ROM.
2. Go to your printer's Control Panel and print the Print Settings
page. Details are in this document in the section entitled Print
the Print Settings Page.
3. Check the Print Settings page and verify that both NetBEUI
protocol and desired connector are enabled.
4. On the settings page note the NetBEUI Name, Service Name, and
hardware address of the Network Interface Card.
5. Run the Setup program located in the ,
<drive_letter>\instal\utility\WFW95P2P folder on your CD-
ROM. Follow the prompts and enter information as necessary.
The setup program will require you to restart Windows.
6. At the Welcome screen click Next>.
7. The Destination Location screen will appear, showing where the
files will be installed. Change the directory with the Browse
button, or click Next>.
W I N D O W S 11