Novell Netware Setup; Netware 3.1X/4.X/5.0 Print Server Setup - Xerox PHASER 5400 Advanced Features And Troubleshooting Manual

Novell NetWare setup

NetWare 3.1X/4.X/5.0 print server setup

The Phaser 5400 printer defaults, in most cases, enable connection to Novell NetWare
without adjustment. Review the Configuration Sheet and verify the following settings:
Netware is enabled.


Frame Type matches the frame type of the desired file server.


PDL is set to your desired PDL (PostScript or PCL) or to Auto. You may wish to set


PDL to the desired type if only one PDL is used.
Desired Novell mode is set: NDS/BEM, NDS or BEM


Print Server Name


Setup with CentreWare DP
The CentreWare DP software supplied on the Printer Management Software CD-ROM
provides you with the quickest and easiest method for installing your printer on a
network. Everything you need to know to use this software is contained in the help files. If
you prefer, a CentreWare DP User Guide in several languages is provided in PDF form on
the Printer Management Software CD-ROM in the \doc\ folder. Please take a minute to
examine this software.
Advanced setup in bindery mode or for NetWare Directory Services Network
(NDS)
The Advanced Setup option of CentreWare DP gives you an additional tool to control how
your printers are configured in your Novell NetWare network environment. This tool is
only necessary for connecting your printer to more than one file server or queue.
Novell NetWare Distributed Print Services (NDPS/ NEPS)
In order to access Xerox printers in this environment, you need the Xerox Gateway
software installed on your system. The latest version of the Xerox Gateway Software is
available on the Xerox web site: www.xerox.com/officeprinting. Instructions are available
on the web site for how to install your printer using NDPS. The web also contains the
CentreWare for NDPS User Guide.
Advanced Features and Troubleshooting Manual
Networking
65