Table of Contents
Advertisement
1.7
8254E only - Operational procedure labels
This section explains the handling of the 8254E's operational procedure labels, as well as their location
and types.
The 8264E has no operational procedure labels.
1.7.1
Handling the operational procedure labels
When handling the warning labels, be careful about the following points.
•
If any of the labels are dirty and cannot be read, use cloth, water and neutral detergent
to remove the dirt. Avoid either organic solvents or gasoline.
•
It is necessary to replace the labels if they are damaged, lost or illegible. If the warning
labels have to be replaced, contact your local XEROX dealer.
1.7.2
Location and type of operational procedure labels
The locations of the operation procedure labels are shown in the following two figures.
8254E / 8264E User Guide
13
Advertisement
Table of Contents
Troubleshooting
