Customizing The Features; Basic Procedure - Xerox 5750 System Administration Manual

1 TOOLS MODE

Customizing the Features

Basic Procedure

1 2 3. . .
1-14
To program or change settings of the features, first enter the Tools
Mode. Then, use the keypad to enter the Program Number for the
feature you want to change (refer to the Tools Program Numbers
Chart at the beginning of this chapter). Choose the desired setting
for the selected feature.
The following example shows how to change the default paper
supply tray.
1
At the Tools Mode entry screen, use the keypad to enter the desired
program number.
The copier is in Tools Mode
Enter program number and press Start
Tools Program Number = 1
To correct your entry, press the C button on the Control Panel
and try again.
2
Press Start.
The next screen is displayed.
Select default tray for Paper Supply & press Start
1 Auto
4 Tray 3
2 Tray 1 3 Tray 2
5 Tray 4 * Close
5750 SYSTEM ADMINISTRATION GUIDE