Xerox 721 Message Manual page 97

XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE
OS1292 Command ignored.
Main or Aux Cluster not selected
The FEED command can only cause the system to toggle
between the MAIN and AUX clusters. Since neither MAIN nor
AUX had been selected, this command has been ignored.
Action Enter the name of the specific cluster you wish to select. (Refer
to your 4635 LPS Operations Reference chapter on setting up
print jobs for additional information.)
OS1293 Feed Main/Aux not in effect, unable to toggle
The system is unable to switch (toggle) between the main and
auxilliary feeder trays.
Action Check your cluster configuration and enter a new command that
will allow toggling. (Refer to the chapter on feeder trays in your
4635 LPS Operations Reference.)
OS1294 Invalid paper tray selected. Command ignored
A command was entered that refers to a (feeder) tray not in the
printer configuration, e.g., (feeder) trays 3 and 4 can only be
selected when your printer has a high-capacity feeder.
Action Select a (feeder) tray that is part of your printer's configuration.
(Refer to the chapter on feeder trays in your 4635 LPS Operator
Guide.)
OS1295 Destination trays not configured for this command
A command was entered that is invalid for the printer's stacker
tray configuration.
Action Reenter the command, using a stacker bin that your system has.
(Refer to the output tray or bin chapter in your 4635 LPS
Operator Guide.)
OS1296 There is no stockset specified at this time
The CLUSTER SET or CLUSTER SET N/R command was entered
but the collection of stocks to be used in the print job has not
been specified. (Refer to your 4635 LPS PDL/DJDE Reference.)
Action Reprogram job to contain a stockset or wait until such a job is
running before entering this command.
OS1297 There are no current trays in any cluster
The CLUSTER command was entered but no clusters have been
defined.
Action Define the desired cluster. (Refer to your 4635 LPS Operations
Reference chapter on setting up print jobs for additional
information.)
OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-21